Rebar Detector

Many people do not understand the correct use of rebar detector in concrete, resulting in inaccurate final results. Today, I summarized the following points for the use of rebar detector in concrete f

1 Preparation before use First take the instrument out of the case, connect the probe and the host during the thickness test and diameter test, connect the host to the probe and the distance measurin

As an interior design lion, many times go to the construction site to communicate with customers, and the load-bearing wall inspection tool that you carry with you is your own. With a fist, he hit the

1.Connect the signal cable to the host and the probe, and tighten the plug with the fixing screw. 2.Press ON/OFF key to turn on the rebar gauge, enter the option menu, and preset the rebar diameter

The rebar detector is mainly used for testing the position of the steel bar, the thickness of the protective layer, the distance between the steel bars and the diameter of the steel bar in the concret

The rebar detector uses the electromagnetic induction method to detect: the location of the steel bar, the thickness of the protective layer and the diameter of the steel bar in the concrete structure